Are you familiar with the oil seal? Simply speaking, it is an element that is used to seal the oil. It is the very important component for all kinds of mechanical equipments. Although it is small, its application is quite wide. To some degree, its quality and properties have a direct influence on the reliability of the mechanical equipment. Some of these seals have a year’s operation life. Some can only be used for several months. These seals are easily out of service because of the oil leakage. As a result, the working efficiency of the mechanical equipment is seriously affected. Meanwhile, the production cost is increased and the environment is polluted.
Generally speaking, the working principle of the oil seal is simple. In the free condition, the inside diameter of the oil seal’s lip is smaller than that of the shaft collar. And it has the shrink range. After this seal is installed, the interference pressure and the shrinkage force will generate the radial thrust on the slewing axis. When this seal is in operation, the lip of the oil seal will form a seal belt under the influence of the radial thrust. Under the pressure of the lubricating oil the fluid permeates the cutting edge of the oil seal and a layer of oil film is formed. The oil layer can prevent the oil leakage and play an important role in sealability.
During operation, there are a lot of factors that result in the oil leakage. The bad sealability of this seal is the main factor. When the shaft is abraded seriously and there is a groove on the shaft, the oil seal will lose its sealability. Even through people change a new oil seal, the sealability still can not be improved. When the contact pressure between the lip and the shaft is reduced, the shrink range becomes very small and thus the sealability becomes very weak.
How to solve the above-mentioned problem will be introduced as follow. First, the basic method is to grasp the knowledge of the oil seals. Then people can identify the quality and function. Second, check and maintain this seal regularly. As far as we know, the oil seals are often used in the harsh working conditions. The difference in temperature is very big and there is a lot of dust in the environment. If people do not examine them, they are easily out of service. Third, if the shaft collar is seriously abraded or the rubber of this seal becomes old, the related components should be repaired or changed immediately. Fourth, the unused oil seals should be kept properly. Or else, the seals will be easily stained with the dust or greasy dirt. Then they will be out of service.
SeekPart.com is the global B2B platform in the industry of mechanical parts. SeekPart aggregates the trade leads in this area, and our ultimate target is to benefit the buyers and sellers of mechanical parts by utilizing these leads through our online tools.
Click for more information about the seekpart
Article Source: http://EzineArticles.com/?expert=Li_Lily
Article Source: http://EzineArticles.com/6190454
FAX: 886-4-24070255
B2B Hardware News 